Save time on your “black tank” installation with the VETUS BTANK25C. It is supplied with the following connections: Fixed hose connector Ø 19 mm for the breather line. Rotating hose connector Ø 38 mm with pick-up pipe, for waste water suction. A Ø 42mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. The BTANK25C comes complete with apre-fitted inspection lid and is made in accordance with ISO 8099 standards.
The VETUS waste water tank is made from high-grade linear polythene and is designed to be odour free when used for the temporary storage of organic waste materials (suited for both “black“ and ”grey” water). The centre point for a SAE flange gaugesender is incorporated in the moulding together with 5 blind bolt holes. The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. Further extras include a discharge pump and the WWCP waste management panel.